The parallel transfer machine is a kind of parallel transition conveying equipment applied between the two ends of the automated production line or between the two conveying lines with deviations in the center line. It is mainly composed of rack components, transfer trolleys, conveying guide rails, electrical control and other parts. The following ZENS shares the working principle and characteristics of the parallel transfer machine.
The parallel transfer machine is composed of mechanical transmission parts, text and an electric control system centered on a programmable controller. The transmission parts use a strong synchronous belt and cooperate with the stepping motor to drive, its working stability is high, and the connection and positioning are accurate; the automatic control method is adopted to facilitate the operation and debugging. It uses 1 or 2 mobile trolleys to move back and forth between 2 specific positions, for the realization of SMT or plug-in equipment and the automation and perfect docking between the equipment of the logistics system, (1 point 2 and 2 in 1 or 3 in 1 and other specific Convergence or diversion of occasions), and the design of intelligent automation product equipment system.
The parallel transfer machine is a horizontal connection and parallel transfer mechanism especially for the placement or plug-in assembly line, which is used for PCB board sub-board transfer and transportation. It can meet the transmission needs of PCB boards with a width of 50-300mm and a suitable length for mounting or short-plug components. It is suitable for dislocation translation connection between SMT production lines or DIP production lines or other logistics systems, and automatically transfer the workpiece (PCB or sheet material) to the production mode of the next specific equipment. It can use 2 to 4 patch lines with only 1 reflow soldering or 2 plug-in lines with only one wave soldering.
