1. Reasons for the deformation of the negative film of the processing circuit board:
(1) Temperature and humidity control failure
(2) The temperature rise of the exposure machine is too high
2. The solution to the deformation of the negative film of the processing circuit board technology:
(1) Under normal conditions, the temperature is controlled at 22±2℃, and the humidity is controlled at 55%±5%RH.
(2) Use a cold light source or an aerator with a cooling device to constantly replace the back film.
3. Negative film deformation correction process:
Change the hole position method: Under the condition of mastering the operation technology of the digital programmer, first compare the negative film with the drilling test board, and measure the length and width of the two deformations. On the digital programmer, lengthen or shorten the hole position according to the amount of deformation, and use the drill test plate with the lengthened or shortened hole position to fit the deformed negative film. This method eliminates the tedious work of splicing films and ensures the integrity and accuracy of the processed circuit board graphics.
Hanging method: In view of the physical phenomenon that the negative film changes with environmental temperature and humidity, put the negative film in a sealed bag before copying the negative film and hang it for 4-8 hours under working environment conditions to deform the negative film before copying. It becomes very small after copying.
Splicing method: For patterns with simple lines, large line widths, and irregular deformations, you can first cut the deformed part of the negative, and then re-splice the drilled test plate holes before copying.
Pad overlap method: Use the hole on the test board to enlarge it to the size of the pad and remove the deformed wire to ensure the minimum loop width technical requirement.
Texture method: magnify the graphics on the deformed film of the processed circuit board proportionally, and re-lay the board
Shooting method: Use the camera to zoom in or out of the deformed graphics.






