Air Lead-free Reflow Oven

1、Windows-XP window operation interface, design two kinds of control methods, computer control and emergency manual control, with security protection function;

2、The heating method adopting the world's top German technology has extremely high heat transfer rate. The same furnace temperature setting can achieve 15% higher capacity than similar models, and the same production capacity can achieve 15-20°C lower temperature than similar machines. Setting to further reduce the micro-damage of hot air to the PCB board and components;

3、Each temperature zone adopts a forced independent cycle, independent PID control, independent heating up and down, so that the furnace cavity temperature is accurate, uniform, heat capacity

4、Due to the unique transport wind way, the influence on the rail surface of the PCB to undesirable temperature on PCB

     The heating of the board is more uniform and faster than similar models.

5、The unique furnace uniform wind structure can adjust the wind speed difference caused by different structures in different areas of the furnace, and the heating is extremely uniform;

6、Adopt imported high-temperature motor, long-term use, stable quality;

     Built-in air-cooled area, double-sided cooling, excellent cooling effect;

7、Forced discharge of cooling gas, use of air conditioning environment, environmental protection and power saving;

8、own temperature curve test function (3-way temperature measurement system);

9、Configuration guide rail belt conveyor system;

10、The heating area cover can be opened automatically to facilitate maintenance, and is equipped with open cover safety device;

1.what can you buy from us?
SMT whole production line,chip mounter,AOI inspection machine,pick and place machine,reflow oven and so on.

2. How can you get our help and after-sale service?
We have offices overseas in USA, Mexico, India, Thailand, Russia, etc. If you have technical problems,we can help.

3. what services can we provide?
A、Quick response within 24 hours;
B、Offer free spare parts and service within one year of warranty,but all the other relative cost should be on the buyer's account;
C、Technology Support :Provide Demo operation video for training ;If you have time,welcome to our company,we will arrange engineers to show you the operation

4.What we can do?
1、PLC&PC research
2、Hardware development
3、Process&Quality Improvement
4、Customize for customer
5、On-site lean management
6、Market analysis&planning